Computer with ThinkingHome software to control lighting and Vernier LabPro equipment to monitor water quality
Left part of the picture: Back of the 65 gallon tanks. Lit with 4x96W PC fixture (1/2 actinic, 1/2 1000K). Tanks use Tunze and MaxiJet Mod powerheads. Left tank is drilled for overflow. Right tank uses overwall overflows with aqualifter pumps.
Right part of the picture is our 50 gallon frag tank made from a Rubbermaid stock tank. Hydor Koralia 4 powerhead. Lit with a 250W IceCap MH ballast and Radium 20000K bulb. Reflector mounted on a Light Rail light mover system. LED moonlights.
Foreground shows our gravity fed, float valve operated topoff system (white bucket), 20 gallon tall isolation/hospital tank and 30 gallon long refugium with CPR Remora skimmer and 2x55W PC light fixture.
Left two tanks are the 50 gallon tanks. Drilled overflows. Each are lit with 250W IceCap MH ballasts with 20000K Radium bulbs on Reef Optix I reflectors. Hydor Koralia 4 powerheads in each tank.
Right tank is the 125 gallon reef tank. Drilled overflows. Lit with 175W IceCap MH ballasts with 15000K Iwasaki bulbs in Lumenarc Mini reflectors. Reeflow Dart closed loop pump, MaxiJet Mod powerhead on an APC Uninterruptible Power Supply for backup circulation during power outages.
Common equipment:
100 gallon Rubbermaid stock tank sump for all tanks.
Iwaki 70 return pump that feeds two SCWD wave devices. Left SCWD alternates flow between the two 50 gallon tanks. Right SCWD alternates flow between 125 gallon reef and splits flow between two 65 gallon tanks.
MRC MR-2R recirculating protein skimmer driven by Iwaki 55 Japanese pump and fed by a Blueline 30 pump that first flows through a 1/3 HP Current USA Prime Tower chiller. Dose 50mg/hr ozone from a RedSea Aquazone ozonizer
Titanium heaters operated by a Ranco dual stage temperature controller.
100 micron filter socks for water polishing
Fluval 205 canister filter for running carbon, etc.
100 gallon Rubbermaid stock tank to mix up saltwater for water changes